| Characteristic |
Transmitter |
Display Receiver (with mains plug) |
|
Dimensions |
88mm (W) x 88mm (L) x 145mm (H) ±1mm |
AUS/NZ: 50mm(W) x 59mm(D) x 199mm(H) ±3mm |
|
Weight |
143g |
AUS: 71g |
|
Housing Material |
UV Stabilized Polypropylene |
ABS |
|
Operating temperature |
-10°C to 60°C (Note 1) |
-10°C to 60°C |
|
Storage Temperature |
-20°C to 60°C (Note 1) |
-20°C to 60°C |
|
Altitude range |
<2Km above sea level |
<2Km above sea level |
|
Environmental Protection |
IP67 – Outdoors |
IP44 Indoors only |
|
Radio frequency |
NZ/AUS: 433.92 MHz FM |
N/A |
|
Radio output power |
NZ/AUS: 5dBm +/- 2dBm |
N/A |
|
Receiver Sensitivity |
N/A |
-100dBm to -110dBm @ 0.001 BER |
|
Ultrasonic range |
>12cm to <3M (Note 2) |
N/A |
|
Ultrasonic signal diversion |
30° (Note 3) |
N/A |
|
Material compatibility |
(Note 4) |
N/A |
|
Power requirements |
VARTA CR2430 3V Li-Manganese dioxide/Organic Electrolyte (fitted) |
EU/UK/NZ/AUS: 230V AC 50-60Hz, 20mA |
|
Battery life |
> 5 Years |
N/A |
|
Humidity range |
15% – 95% |
15% – 95% |
|
LCD Display |
N/A |
10 digit bar graph with icons |
|
|
||
| Tank mounting options | Drill 60mm hole and secure to tank using 2 x self tapping screwsScrews directly into 1 ¼”, 1 ½” or 2” BSP existing tank connection | |
| Gasket (included) | Material EPDM, Ø88mm x 4mm (H) ±1mmDistance between hole centres 75mm ±1mm | |
| Screws (included) | No.8 X 19mm Panhead Pozi-drive Stainless steel | |
| Stabiliser support | Optional extra to maintain horizontal alignment on tanks with angled top. | |
Note 1: Storage and operation above 20°C may reduce battery life. Note 2: Based on a measurement to a flat liquid target of size 30cm2. Option to extend range to 5m on some models. Note 3: The maximum spatial diversion of the ultrasonic signal will be < 30° from the central axis of the transducer. Note 4: Suitable for use in tanks for the storage of water diesel fuel, kerosene, AdBlue, gas oil types A2,C1,C2 and D as defined by BS2869
